apsis-rs/docs/design/glossary.zh.md

135 lines
4.3 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# 术语与公式约定 / Glossary and formula conventions
[English](./glossary.md) | [简体中文](./glossary.zh.md)
本文件规定代码注释与文档中专业术语的译法,以及公式的写法。翻译注释时以此
为准。
## 原则
**中文段落里,术语一律用标准中文名。** 领域内已有约定俗成译法的词,直接
译,不逐次附英文。英文段落保持原文,两段并列,读者可任选一种阅读。
**专有名称、缩写、人名、模型名、方法名保留英文。** 这些词在原始资料
(ITU-R 建议书、NASA 轨道力学文献、Rust 标准库)中只有英文形式,译成中文
会让读者无法检索到出处。
## 保留英文的词
| 英文 | 类别 | 说明 |
| --- | --- | --- |
| SGP4、SDP4 | 模型名 | 轨道传播模型 |
| Hermite | 人名 | 插值多项式 |
| Walker | 人名 | 星座构型 |
| Newton | 人名 | 迭代方法 |
| Runge-Kutta | 人名 | 积分方法 |
| Vandermonde | 人名 | 插值矩阵 |
| Hohmann | 人名 | 转移轨道 |
| TLE、BSTAR | 格式与字段名 | 两线根数集及其字段 |
| ECI、ECEF、TEME、ITRF、GCRS、ERA、GAST | 缩写 | 坐标系与地球自转量 |
| Isp、TAI、UTC、UT1、MJD、JD | 缩写 | 比冲与时间尺度 |
| TUMIN、XKE、X2O3 | 符号 | 模型内部量 |
| EIRP、C/N0 | 缩写 | 链路指标 |
| delta-v | 惯用写法 | 速度增量,中文亦常写 Δv |
以上在中文段落中同样原样保留。
## 采用标准中文名的词
以下在中文段落中直接使用中文,不附英文:
| 英文 | 中文 |
| --- | --- |
| semi-major axis | 半长轴 |
| semi-minor axis | 半短轴 |
| semi-latus rectum | 半通径 |
| eccentricity | 偏心率 |
| perigee | 近地点 |
| apogee | 远地点 |
| true anomaly | 真近点角 |
| mean anomaly | 平近点角 |
| eccentric anomaly | 偏近点角 |
| right ascension | 赤经 |
| argument of perigee | 近地点幅角 |
| inclination | 倾角 |
| ascending node | 升交点 |
| osculating | 密切 |
| element set | 根数集 |
| two-line element | 两线根数集 |
| epoch | 历元 |
| ephemeris | 星历 |
| drag term | 阻力项 |
| perturbation | 摄动 |
| deep space | 深空 |
| resonance | 共振 |
| nodal | 交点 |
| zenith | 天顶 |
| nadir | 天底 |
| sub-satellite point | 星下点 |
| footprint | 覆盖区 |
| mask | 遮蔽角 |
| elevation | 仰角 |
| azimuth | 方位角 |
| central angle | 地心角 |
| slant range | 斜距 |
| path loss | 路径损耗 |
| attenuation | 衰减 |
| specific attenuation | 比衰减 |
| rain rate | 降雨率 |
| cross-section | 截面 |
| noise temperature | 噪声温度 |
| noise figure | 噪声系数 |
| signal to noise ratio | 信噪比 |
| free space path loss | 自由空间路径损耗 |
| specific impulse | 比冲 |
| exhaust velocity | 喷气速度 |
| propellant | 推进剂 |
| precession | 岁差 |
| nutation | 章动 |
| equinox | 分点 |
| Earth rotation angle | 地球自转角 |
| Modified Julian Date | 修正儒略日 |
| leap second | 闰秒 |
| assumed decimal point | 隐含小数点 |
| two digit year | 两位数年份 |
| checksum | 校验和 |
| scenario | 场景 |
| precedence | 优先约束 |
| placement | 放置 |
| candidate | 候选 |
| boundary | 边界 |
| invariant | 不变量 |
| reachability | 可达性 |
| shortest path | 最短路 |
| mutual visibility | 互见 |
| blocking | 遮挡 |
| cross-check | 对拍 |
| capacity | 容量 |
| demand | 需求 |
| window | 窗口 |
| availability | 可用性 |
| precedence graph | 优先关系图 |
## 公式
- 公式原样保留,不改写、不化简、不补全。
- 注释中出现的公式必须与实现一致。改动代码时同步改注释。
- 变量名、函数名、字段名、模块名一律保持英文原样。
- 行内公式写作 `` `a (1 - e^2)` `` 这样的代码样式;多行公式用 `/// ```text` 代码块。
- 单位写在括号里,例如 `半长轴,单位为千米`。
## 注释的排版
同一段说明的英文与中文之间用一个空的 `///` 行分隔,英文在上:
```rust
/// Returns the phase offset applied between adjacent planes, in radians.
///
/// This is `f * 360 / t` degrees, where `f` is the phase factor and `t`
/// the total satellite count.
///
/// 返回相邻轨道面之间施加的相位偏移,单位为弧度。
///
/// 即 `f * 360 / t` 度,其中 `f` 为相位因子,`t` 为卫星总数。
```