ApsisRS contributors
68735b2075
docs: bilingual comments for the rf tests
2026-10-02 01:57:31 +08:00
ApsisRS contributors
fe77c981bf
docs: bilingual module docs for the rf layer
2026-10-02 01:48:55 +08:00
ApsisRS contributors
a2c2f5984a
docs: bilingual comments for the validation tools
...
Also makes the table generators emit the bilingual module docs, so a
regenerated table matches the committed one.
2026-10-02 01:44:36 +08:00
ApsisRS contributors
39c0ebce03
docs: bilingual comments for the antenna, doppler, interference and noise crates
2026-10-02 01:31:41 +08:00
ApsisRS contributors
6ada2c07d9
docs: bilingual comments for the link budget and antenna patterns
2026-10-02 01:29:47 +08:00
ApsisRS contributors
90efe14632
docs: bilingual comments for the atmosphere attenuation models
...
The P.838 rain curves, the P.676 gaseous lines, the P.839 isotherm table
and the P.835 layered refraction.
2026-10-02 01:28:58 +08:00
ApsisRS contributors
3f780f36e1
docs: bilingual comments for the decibel and gain scales
2026-10-02 01:16:30 +08:00
ApsisRS contributors
2f62d2522b
docs: extend the bilingual sweep into routing, topology, access and rf
...
A translation table for the sentences that recur across the error types
and the simple accessors let the same wording be applied everywhere at
once, which both keeps the Chinese consistent and covers a hundred and
twenty-nine sites in a single pass. Routing, topology, access and the radio
frequency crates are now part of the sweep.
2026-10-02 01:10:40 +08:00
ApsisRS contributors
c9d2605385
docs: fix the broken intra doc links and check them in CI
...
Running rustdoc with -D warnings found nine broken links: a misspelt
WGS84, links to methods and constants that are private or in a crate that
is not a dependency, and three redundant explicit targets. Fix each and add
a documentation step to CI so a doc comment cannot drift away from the code
it describes without the build noticing.
2026-09-26 23:37:48 +08:00
ApsisRS contributors
7531ebacd6
workspace: remove dependencies that are declared but never used
...
Thirty four crates listed apsis-core or apsis-math without referencing it,
and apsis-kepler listed apsis-time and apsis-tle as well. Each was verified
removable by compiling with it taken out. An unused dependency still costs
build time and makes the dependency graph and the layer check report
relations that do not exist. The layer check now reports 104 edges, down
from 141.
2026-09-26 23:36:38 +08:00
ApsisRS contributors
990f1d47d0
rf: add the exact P.676 slant path with the P.835 atmosphere
2026-09-26 15:43:12 +08:00
ApsisRS contributors
3116d8c22d
rf: pin the S.465 revision in the citation
2026-09-26 15:36:23 +08:00
ApsisRS contributors
a0730cfb33
rf: derive the rain height from P.839 in the path method
2026-09-26 15:35:20 +08:00
ApsisRS contributors
b298a00651
rf: add the ITU-R P.839-4 rain height model
2026-09-26 15:34:34 +08:00
ApsisRS contributors
ed833d2d59
workspace: add the S.465 cross-check and document the ITU-R suite
2026-09-26 15:29:41 +08:00
ApsisRS contributors
37d8d977d4
rf: add the ITU-R S.465 reference antenna pattern
2026-09-26 15:27:58 +08:00
ApsisRS contributors
1d8ff398bb
rf: correct the P.618 elevation units and the pattern citation
2026-09-26 15:18:10 +08:00
ApsisRS contributors
d5ba27e784
rf: replace gaseous and rain models with ITU-R P.676-12 and P.838-3
2026-09-26 15:13:48 +08:00
ApsisRS contributors
8144df75a3
rf: add carrier to interference and noise combination
2026-09-26 14:44:05 +08:00
ApsisRS contributors
1581a1951c
rf: add atmospheric gaseous and rain attenuation models
2026-09-26 14:42:47 +08:00
ApsisRS contributors
85f3d8198c
rf: add Doppler shift and range rate models
2026-09-26 14:40:12 +08:00
ApsisRS contributors
fcc45eddbd
rf: add link budget with gain to temperature figure
2026-09-26 14:38:32 +08:00
ApsisRS contributors
32a9b1634f
rf: add noise temperature and cascade models
2026-09-26 14:37:15 +08:00
ApsisRS contributors
c9baeb87d2
rf: add parabolic aperture and off-axis pattern models
2026-09-26 14:36:01 +08:00
ApsisRS contributors
cd1cdb7810
rf: add decibel, power, gain, and free space primitives
2026-09-26 14:32:58 +08:00
ApsisRS contributors
539f29c7b5
workspace: initialize workspace with all layer crates
2026-09-26 12:53:13 +08:00